Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Apply Adhesive Seals to the Windscreen?

Model: (Various brands) Various
Part: Accessory kit

The YouTuber behind this video shows how to apply an adhesive seal to the windscreen of your car, regardless of the model or manufacturer. This accessory is important for enhancing thermal and acoustic insulation within the vehicle. After obtaining a suitably long strip of adhesive seal, clean the windscreen thoroughly and dry it completely. Now take the seal and apply it along one of the edges of the windscreen, cutting it as necessary. Repeat the same operation for all four sides.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen
How to Replace the Windscreen
(Various brands) Various First, apply the complete seal to the new windscreen that has not yet been installed. Now, remove the external seal present on the windscreen install…
How to Remove the Telepass Sticker from the Windscreen?
How to Remove the Telepass Sticker from the Windscreen?
(Various brands) Various If you need to remove the 3M adhesive Velcro used to attach the Telepass to the windscreen next to the rear-view mirror, proceed as follows: First, s…
How to Replace the Toll Tag in Your Car
How to Replace the Toll Tag in Your Car
(Various brands) Various Start by removing the old toll tag by carefully pulling it towards you. Next, remove any adhesive residue left on the windscreen using alcohol or a s…

    Frequently Asked Questions

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos