Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Telepass Sticker from the Windscreen?

Model: (Various brands) Various

If you need to remove the 3M adhesive Velcro used to attach the Telepass to the windscreen next to the rear-view mirror, proceed as follows: First, soften the adhesive with a damp pad of trichloroethylene, petrol, or stain remover; Svitol works even better, as it should be sprayed directly onto the adhesive. Meanwhile, keep the doors open due to the acids present, and place a cover over the dashboard to prevent any drops of the product from falling and permanently staining the plastic. Wait a few minutes for the adhesive to soak well, then gently peel off the adhesive with your fingers without scraping.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to position the Telepass holder on a vehicle
How to position the Telepass holder on a vehicle
(Various brands) Various The installation of the telepass holder is a simple and quick operation to be carried out independently. First of all, the ideal position behind the …
How to Replace the Toll Tag in Your Car
How to Replace the Toll Tag in Your Car
(Various brands) Various Start by removing the old toll tag by carefully pulling it towards you. Next, remove any adhesive residue left on the windscreen using alcohol or a s…
How do you remove the Telepass from the windshield?
How do you remove the Telepass from the windshield?
(Various brands) Various In order to remove the Telepass from the car windshield, you will need to use a very thin wire, which should be inserted between the device's attachm…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos