Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the hole in the car seat with the ATG kit

Model: (Various brands) Various
Part: Seat

Today we will explain how to repair a hole in the seat using the ATG kit. The kit is available in various colors and can be purchased online. We remove the excess fabric from the perforated area using a utility knife. Cut out a piece of fabric large enough to cover the hole and insert it into the hole using the spatula included in the kit. Sprinkle fabric glue inside and outside the hole. Pour the fabric color powder into a small container and add the fabric glue; mix the two components until a homogeneous mixture is obtained. Spread the mixture on the seat. Let it dry for an hour and remove any excess.

Posted on 4 October 2025 by ScegliAuto

Video tutorial

Related tutorials

ATG KIT for repairing burns on car seats
ATG KIT for repairing burns on car seats
(Various brands) Various If we have the bad habit of smoking in the car, unfortunately we may end up with burns on our fabric seats. With a little patience, we can effectivel…
How to Repair Car Seat Fabric
How to Repair Car Seat Fabric
(Various brands) Various To repair the seat, use a patch with one side coated in adhesive to prevent the hole from widening. Start by removing the yellow foam by hand to ensu…
How to Repair a Hole in Car Upholstery
How to Repair a Hole in Car Upholstery
(Various brands) Various If you need to restore damage to the fabric of your car seat, the following description and video will provide the necessary information and instruct…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos