Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How is the leather of car seats repaired?

Model: (Various brands) Various
Part: Seat

The leather covering the seats of cars inevitably wears out, fades, and, although it is not always the case, sometimes cracks. What can be done if this last scenario occurs? There are repair kits available, and one of them is shown in the video, which can solve the problem, and the advantage is that you can do it yourself, saving money. After cleaning the damaged area, a small piece of fabric is inserted and glued, then covered with a specific paste, which needs to be spread and then heated by placing a piece of Teflon paper on top, pressed with the special tool provided in the kit. After waiting a moment, the job can be considered complete.

Posted on 24 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Washing Seats and Upholstery
(Various brands) Various Tool for washing and cleaning car seats. …
How can moisture buildup in the car headlight be eliminated?
How can moisture buildup in the car headlight be eliminated?
(Various brands) Various The creation of humidity in the front headlights of the car could, immediately or over time, reduce the effectiveness of the light emitted by the opt…
Removing Rear Seats from a Car
Removing Rear Seats from a Car
(Various brands) Various In this tutorial video, learn how to remove the rear seats from a generic car. Open the rear door and apply force to the bottom of the seat to lift i…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos