Do it yourself
Frequently asked questions about cars and motorcycles

How to Clean the Car's Cooling Circuit

Model: (Various brands) Various
Part: Checks and maintenance

The air cooling circuit should be cleaned every 50,000 to 100,000 miles or every 2 to 5 years (whichever comes first); it removes dirt, rust, and sediment that clog the system, prevents engine overheating, and maintains engine efficiency. To drain it, the engine must be cold. Drain the coolant from the radiator drain plug; add a specific cleaner for cooling circuits, start the engine, and let it run for the time indicated by the product. Then turn off the engine and drain the cleaner. Rinse with clean water until it runs clear, then fill with new coolant (type and brand recommended by the manufacturer), start the engine, and check that the temperature remains normal.

Posted on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video tutorial, you can see how to bleed the car's cooling system. Whenever you drain the fluid, it is necessary to bleed the system, for exa…
(Various brands) Various In this video, we will see the strategy to follow if the cooling system is in the red range of the gauge, meaning close to boiling. In this case, the…
(Various brands) Various In this video tutorial, you will see a diagram representing the operation of the radiator and the entire cooling system of an internal combustion eng…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos