Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does it mean if we have to top up the coolant in our vehicle?

Model: (Various brands) Various
Part: Antifreeze coolant

In this video, we are explained well what it means if we have to periodically add coolant to the appropriate tank of our car. The cooling system is a sealed circuit, so the level of the liquid must always be the same and can only vary between the minimum and maximum levels indicated on the tank based on the engine temperature when it is running. However, the quantity of liquid is always the same, and if we have to periodically add liquid, it means there is a problem, which can be of three types: evaporation of the liquid itself, a leak in the circuit, or intense use, especially in hot climates or with heavy loads, which can cause the liquid to evaporate. The recommendation is always to top up the liquid of the same color as that contained in the tank.

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace or Top Up the Coolant on a KTM Motorcycle
How to Replace or Top Up the Coolant on a KTM Motorcycle
(Various brands) Various The first warning, which may seem trivial - but it isn’t - is to check the coolant with the engine cold. Check if there is coolant, which is specific…
How to Replace the Radiator Fluid on the Yamaha X Max
How to Replace the Radiator Fluid on the Yamaha X Max
(Various brands) Various If you need to top up the coolant on your scooter, you can find instructions on how to proceed in the description below and in the video. First, use …
How to Top Up and Check the Coolant Level?
How to Top Up and Check the Coolant Level?
(Various brands) Various To check the coolant levels in a car, follow the procedures and useful tips outlined below and take a look at the video tutorial as well. After openi…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos