Do it yourself
Frequently asked questions about cars and motorcycles

How to Top Up the Radiator Fluid on a Yamaha Xmax

Model: (Various brands) Various
Part: Radiator

To check the coolant level and top it up on your scooter, follow the instructions in this description and also check the images in the video. First, open the flap located on the floor of the scooter's footwell and remove the two clips securing the plastic panel underneath. Beneath it, you will find the coolant filler cap, which you will unscrew. Using a small tube or funnel, proceed to top up the fluid.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various If you need to top up the coolant on your scooter, you can find instructions on how to proceed in the description below and in the video. First, use …
(Various brands) Various Resetting the oil light on the 2007 Yamaha Xmax 250 is a very simple operation that you can carry out independently. It is important to reset the lig…
(Various brands) Various When the AdBlue system warning light comes on in a vehicle, it means you need to top up the fluid in the tank, usually after driving 2,500 miles. The…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos