Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery on a Yamaha Xmax

Model: (Various brands) Various
Part: Battery

To change the battery on the Yamaha Xmax, start by opening the front panel. Use a screwdriver to remove the 2 screws securing the cover. Once the cover is off, use an Allen key to remove the screw holding the battery clamp. After removing the battery clamp, take out the battery and unscrew the battery terminals. Take the new battery, screw in the terminals as they were on the old battery, place the battery back in its compartment, refit the battery clamp by tightening the screw with the Allen key, replace the cover by screwing in the 2 screws with a screwdriver, and finally close the front panel. Now you can test the new battery.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Resetting the oil light on the 2007 Yamaha Xmax 250 is a very simple operation that you can carry out independently. It is important to reset the lig…
(Various brands) Various In this video tutorial, you can see how to replace the engine oil on a YAMAHA XMAX 250. The first step is to start the engine for a few minutes to wa…
(Various brands) Various If you need to replace the battery on the motorcycle, follow the instructions below: first, remove the front fairing by unscrewing the fixing support…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos