Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Battery on a Yamaha Xmax 300

Model: (Various brands) Various
Part: Battery

Video tutorial

If you need to replace the battery on the motorcycle, follow the instructions below: first, remove the front fairing by unscrewing the fixing supports. After removing the fairing, unscrew the screws located just behind the hand protection cover and gently pull forward the plastic panel until it is completely detached.

Under this panel, you will find the battery, which is secured in its housing with rubber straps that you need to remove. Then, locate the negative terminal and unscrew it, followed by unscrewing the positive terminal.

Take the new battery, position it in the housing, and reattach the positive terminal first, then the negative, and finally reposition the rubber strap.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

(Various brands) Various To change the battery on the Yamaha Xmax, start by opening the front panel. Use a screwdriver to remove the 2 screws securing the cover. Once the cov…
(Various brands) Various Resetting the oil light on the 2007 Yamaha Xmax 250 is a very simple operation that you can carry out independently. It is important to reset the lig…
(Various brands) Various If you have changed the engine oil and filter on this scooter model, you need to update and reset the service indicator that has illuminated on the d…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the battery located in the Sym Jet X? Read answer
    • Vari - Where is the battery located in the Piaggio Beverly? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer
    • Vari - Where is the battery of my Piaggio Medley 150? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos