Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Yamaha Xmax 300

Model: (Various brands) Various
Part: Service warning light

If you have changed the engine oil and filter on this scooter model, you need to update and reset the service indicator that has illuminated on the dashboard. You can find useful instructions in the description below and in the video. The first thing to do is turn on the ignition and select the trip button for the partial mileage. Then press and hold the same button for at least 15 seconds until the oil change indicator starts to flash and then updates. To verify the correct update, turn off the ignition and turn it back on.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Yamaha Xmax 250
How to Reset the Oil Light on the Yamaha Xmax 250
(Various brands) Various Resetting the oil light on the 2007 Yamaha Xmax 250 is a very simple operation that you can carry out independently. It is important to reset the lig…
How to Reset the Oil Warning Light on the Yamaha X Max 300
How to Reset the Oil Warning Light on the Yamaha X Max 300
(Various brands) Various To reset the oil warning light on the Yamaha X Max 300, follow these steps: Turn off the ignition of the X Max, press and hold the mode and set butto…
How to Reset the Oil Change Service Light on a Yamaha Xmax 300
How to Reset the Oil Change Service Light on a Yamaha Xmax 300
(Various brands) Various Once you have changed the oil and filter on this scooter, you need to proceed as follows to clear the service indication present on the dashboard. Us…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos