Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Renew the External Seals of the Vehicle

Model: (Various brands) Various
Part: Checks and maintenance

The external seals of a vehicle can deteriorate and dry out due to external agents the vehicle is constantly exposed to throughout the day. It is important to clean only the seals after washing the car. Spray some cleaner on a microfiber cloth and gently clean all the external seals of the vehicle. After cleaning the rubber, spray some protectant on a microfiber cloth to protect the seals from external agents. This particular product protects the seals from heat sources and cold.

Posted on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Restore Cloudy Headlights on a Car
How to Restore Cloudy Headlights on a Car
(Various brands) Various To restore the shine of cloudy headlights on your car that have aged a bit, follow this simple tutorial: first, cover the entire outer perimeter of t…
How to renew the plastic of the scooter's top box
How to renew the plastic of the scooter's top box
(Various brands) Various Today we will explain how to renew the plastic of the trunk without using chemical products. To carry out this operation, however, we will need to eq…
What do the seals of a used car reveal
What do the seals of a used car reveal
(Various brands) Various In this video we see what the seals of a used car can tell us about its age and wear. We see an example with a German car, therefore with good qualit…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos