Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore a Seat in Eco Leather with Regener Special Ecopelle

Model: (Various brands) Various
Part: Seat

The surfaces in leather, and even more so those in eco leather, of our car seats tend to deteriorate significantly over time, becoming worn and cracked. The recommended product in this video is the Riger Special Ecopelle, which has exceptional qualities that allow for complete renewal, eliminating all traces of wear. You can find it on decorcasa. Online for the price of £24.77, but let's see how to proceed. First, remove all the peeling bits, then sand with 220-grit sandpaper without applying too much pressure, then clean with a cloth soaked in alcohol. Apply a first coat of product diluted with water at 15%. After 4 hours, sand with 320-grit sandpaper soaked in alcohol. After another 4 hours, apply a coat of product over the entire surface. After 6 hours, apply the final coat of Regener over the entire surface. Wait 24 hours before use.

Posted on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the door panel of the car
How to replace the door panel of the car
(Various brands) Various Today we will explain how to replace the eco-leather lining of the front door panel of a car. First, we remove the damaged cover and if necessary, we…
How to install the knob of the Special Hype Simoni Racing
How to install the knob of the Special Hype Simoni Racing
(Various brands) Various Today we will explain how to install the gear knob of the Special Hype Simoni Racing on your vehicle. The first thing to do is to remove the old knob…
How to restore a vehicle's headlight
How to restore a vehicle's headlight
(Various brands) Various Today we will explain how to restore the front headlight of a vehicle. To perform this operation, we need to place masking tape around the headlight,…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos