Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Which Fuse Resets the Scania Radio?

Model: (Various brands) Scania
Part: Car stereo

There is no universal fuse number to reset the radio on all Scania trucks, as the position and number of fuses vary depending on the model and specific vehicle configuration. The YouTuber identifies three possible fuses: #151, which is not present in the vehicle shown; #R112 (also not present in the model shown in the video). However, the fuse #155, which is a 15 A fuse, is present in the truck in the video and worked correctly for the reset. It is recommended to consult the diagram on the fuse box cover, then follow this procedure: completely turn off the vehicle, remove the fuse from its socket, wait at least 10 seconds to allow the capacitors to discharge and fully reset the unit: replace the fuse, turn on the vehicle, and check that the procedure was successful. It may be necessary to repeat it a couple of times.

Posted on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Scania Series R?
What is the fuse diagram for the Scania Series R?
(Various brands) Scania In this video, we can see the location of the fuse box and its corresponding diagram in the Scania Series R, useful in case a device shows signs of m…
How to Access the Fuse Box of Scania P370
How to Access the Fuse Box of Scania P370
(Various brands) Scania This brief guide will show you how to access the internal fuse box of the Scania P370 in simple steps. First, get inside the cab and start by removin…
Internal Fuse Box Diagram and Positioning for Scania R500
Internal Fuse Box Diagram and Positioning for Scania R500
(Various brands) Scania Today's guide will show us the diagram and positioning of the internal fuse box for the Scania R500. First, enter the cabin on the passenger side and…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos