Do it yourself
Frequently asked questions about cars and motorcycles

How to Service a Microcar Aixam

Model: (Various brands) Aixam
Part: Checks and maintenance

Video tutorial

You will need to lift the car with a jack like the one shown in the video. Ensure you have a container to collect the used oil. The oil sump is located under the engine: place the container underneath and, using a 14mm spanner, unscrew the drain plug and let the oil drain out. Once it has drained well, refit the drain plug and lower the vehicle.

Remove the old filter using the appropriate tool (some oil will also come out of the filter). Prepare the new filter and lubricate the seal with a bit of clean oil; fit the new filter, tightening it by hand.

Dispose of the old filter with the used oil at an authorised centre. Unscrew the oil filler cap and pour in one and a half litres of new oil, checking with the dipstick.

Then top up the windscreen washer fluid and check the coolant level. Start the engine and let it run for a few minutes, check the oil level with the dipstick, and top up if necessary.


Posted on 13 November 2026 by ScegliAuto


Related tutorials

(Various brands) Aixam In this video, we see how to change the time on a Microcar Aixam, in this case a 2017 model: turn on the instrument panel, wait for the kilometers tr…
(Various brands) Aixam Today's instructions will allow us to reset the service light for the regular maintenance oil change on the Aixam 50. First, get into the vehicle and…
(Various brands) Aixam The mechanic in the video shows how to service Aixam vehicles. The procedure is not much different from that performed on other types of vehicles and…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos