Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When and How to Change Gears - Gear Usage Guide

Model: (Various brands) Various

Video tutorial

In this video, you will find important instructions on when to change gears at the right moment, without straining the engine and without causing particular difficulties in everyday driving. The gears should be used according to the type of road you are on; if the road is flat, it is advisable not to exceed 2,000 RPM to avoid excessive strain.

However, if you are driving uphill, it will be necessary to rev the gears a bit (perhaps up to 3,000 RPM) to gain more torque and successfully navigate the incline!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Instructions for Dismantling the Comex Gearbox on an Aixam 50
Instructions for Dismantling the Comex Gearbox on an Aixam 50
(Various brands) Various In this brief guide, we will understand the main steps that will help us in the process of dismantling the Comex gearbox from the Aixam 50, as well a…
Refilling and Periodic Checks of Automatic Gearbox Oil.
Refilling and Periodic Checks of Automatic Gearbox Oil.
(Various brands) Various Gearbox oil is essential for lubricating all the gears that allow you to change gears in both manual and automatic gearboxes. Lubrication of the gear…
How to Change the Gear Knob?
How to Change the Gear Knob?
(Various brands) Various To remove and replace the gear knob on your vehicle, refer to the tutorial video and consult the information provided below. Typically, the gear knob…

    Frequently Asked Questions

    • Vari - Triangle Season X TA01 tyres: characteristics and opinions Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos