Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Car Number Plate?

Model: (Various brands) Various

This video tutorial explains how to remove and reattach a number plate and its holder from a car. First, the operation of removing the number plate from the holder is very simple: just move it a bit and slide it out. For removing the holder, you need to unscrew the two screws at the end of the plastic support and pull the piece out. To fit a new holder, simply place it on the support and screw the two screws back in. To insert a new number plate, use a thin, pointed tool to help you fit it properly into the holder. Once done, insert the two side clips, and you're finished.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Number Plate from Your Car
How to Remove the Front Number Plate from Your Car
(Various brands) Various How do you remove the front number plate from your car? It's a really easy task. Let's see how to remove and fit the number plate. Take a screwdriver…
How to Remove the Rivets Fixing the Number Plate?
How to Remove the Rivets Fixing the Number Plate?
(Various brands) Various To remove the rivets from your car's number plate, you need to use a drill: this should be used to turn the rivets fixing the number plate counterclo…
How to Fit a Number Plate Using a European Number Plate Holder
How to Fit a Number Plate Using a European Number Plate Holder
(Various brands) Various Here’s how to fit a number plate in European format using a number plate holder. Obtain a European format number plate holder like the one shown in t…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos