Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
Before we can start, we will have to go to disassemble and remove the injectors of our BMW. Let's start by pouring water mixed with the degreaser into an ultrasonic tank. After that, we will have to immerse the injectors inside the tank with water. Once this is done, we will have to set and start the ultrasound of the tray for 600 seconds. Once the 600 seconds have elapsed, we will have to extract the injectors, and dry them as best as possible. When we have completed this step, we will be able to reassemble the injectors inside the engine of our BMW, and we will have completed the cleaning.
Posted on 22 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |