Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Water Pump from a 1.9 CDTI or JTDm Engine?

Model: (Various brands) Various
Part: Pump

To replace the water pump on a 1.9 CDTI or JTDm engine, remove the side cover to access the pulleys. The water pump is located directly under the upper pulley, but to remove it, you must first remove the timing belt. Once this is removed, you can also take off the pulley and the screws that secure the pump in its housing. At this point, the pump can be extracted and replaced; finally, reassemble all previously removed parts.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various If you want to replace the water pump on your vehicle, you will find the necessary guidelines and information outlined below and in the video. Note t…
(Various brands) Various If you need to replace the water pump on this scooter model, follow the steps outlined below for this operation. First, remove the lower left side co…
(Various brands) Various When performing the distribution, and therefore changing the belt and pulleys that keep it in tension, it is essential to also change the water pump,…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos