Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump

Model: (Various brands) Various

If you want to replace the water pump on your vehicle, you will find the necessary guidelines and information outlined below and in the video. Note that this type of work should be carried out by experienced personnel. First, remove and dismantle the timing belt, and to access it, you will need to remove the covers, the engine mount, the front right wheel, and loosen the tensioner. Once the belt is removed, locate the pulley that drives the water pump and unscrew the bolts securing the pump to the block to extract it for replacement.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Water Pump from a 1.9 CDTI or JTDm Engine?
How to Remove the Water Pump from a 1.9 CDTI or JTDm Engine?
(Various brands) Various To replace the water pump on a 1.9 CDTI or JTDm engine, remove the side cover to access the pulleys. The water pump is located directly under the upp…
Water Pump Replacement on the Yamaha X Max 250
Water Pump Replacement on the Yamaha X Max 250
(Various brands) Various If you need to replace the water pump on this scooter model, follow the steps outlined below for this operation. First, remove the lower left side co…
Why is it important to change the water pump when distributing it?
Why is it important to change the water pump when distributing it?
(Various brands) Various When performing the distribution, and therefore changing the belt and pulleys that keep it in tension, it is essential to also change the water pump,…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos