Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Water Pump Replacement on the Yamaha X Max 250

Model: (Various brands) Various
Part: Pump

Video tutorial

If you need to replace the water pump on this scooter model, follow the steps outlined below for this operation. First, remove the lower left side cover.

Then, open the seat and locate the water pump. Use a screwdriver to unscrew the hose clamp on the coolant pipe to remove it. Next, use a socket wrench to unscrew the securing screws of the pump and the electrical connector.

At this point, you can remove the pump cover and replace it with the new one, then reassemble all components in reverse order.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Water/Oil Pump Seal on a Kawasaki Motorcycle
How to Replace the Water/Oil Pump Seal on a Kawasaki Motorcycle
(Various brands) Various How to replace the water/oil pump seal on a Kawasaki motorcycle. First, remove the cover, take off the underlying cap, and then the sealing disc and …
Where to Find the Fuse Box on the Yamaha X Max 300
Where to Find the Fuse Box on the Yamaha X Max 300
(Various brands) Various If you are looking for the fuse box located inside your Yamaha X Max 300 but have not yet found it, just carefully read the following mini guide and …
How to replace the battery of a Yamaha Max 400
How to replace the battery of a Yamaha Max 400
(Various brands) Various In this video, you will learn how to replace the battery of a Yamaha Max 400. Obtain an Allen key and unscrew the bolts at the ends of the motorcycle…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos