Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Drum Brake Shoes?

Model: (Various brands) Various
Part: Checks and maintenance

To replace the brake shoes on a drum brake, first remove the car wheel. You will need to remove the adjuster pin and loosen the axle nut to extract the wheel hub. Next, remove the tension and compression springs to take out the shoes. You should also replace the return spring of the reverse system. At this point, you can insert the new shoes in the reverse order of disassembly. Once they are in place, refit the wheel hub and secure the axle with the corresponding nut.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Shoes of a Piaggio Porter
How to Replace the Rear Brake Shoes of a Piaggio Porter
(Various brands) Various Before starting, lift the rear of your Piaggio Porter. Begin by removing the rear wheel by unscrewing the fastening bolts. Next, unscrew and remove t…
How to Replace a Handbrake Cable
How to Replace a Handbrake Cable
(Various brands) Various In this video, you will learn how to replace a handbrake cable: the fastening elements connecting the cables to the handbrake lever are located under…
Replacing the Rear Brakes on a VW T2
Replacing the Rear Brakes on a VW T2
(Various brands) Various Is your vehicle not braking well and making noise? Let's look at the removal and replacement of the rear brakes on a VW T2. Loosen the pins with a so…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos