Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Brakes on a VW T2

Model: (Various brands) Various
Part: Brake system

Is your vehicle not braking well and making noise? Let's look at the removal and replacement of the rear brakes on a VW T2. Loosen the pins with a socket spanner and raise it to a comfortable height for working. Unscrew the pins and remove the wheel. Using a socket, relieve the pressure from the caliper, remove the metal protective cover, and prepare to dismantle the brake shoes. Remove the brake shoes from the wheel hub as shown in the video. Clean all dirt and debris from the disassembled parts with brushes. Install the new brake kit after completely removing the old one.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various To adjust the brakes on the trailer, block the brake cam with a 3.8 mm pin as shown in the video: then tighten the brake adjustment nut at the rear u…
(Various brands) Various To bleed the brakes on your car, you need to top up the fluid in the designated reservoir. Next, position a container under each brake that needs to …
(Various brands) Various The video suggests one of the systems to avoid squeaking and brakes on our car, and it is certainly the most sensible regarding rather old cars: it c…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos