Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Car Antenna?

Model: (Various brands) Various
Part: Antenna

To replace the car antenna, first remove the two sun visors located at the front of the car. Once these are removed, you can detach the interior light housing to access the components inside. Here, you will find the screw that secures the antenna from the inside, which needs to be undone. Removing this screw will allow you to detach the antenna from the outside, enabling you to replace it with a new spare part. The new antenna should be secured, and then remount the sun visors and the interior light housing.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various The car radio antenna is not always replaced because it is broken or rusted, often it is also done to install aesthetically more beautiful, current m…
(Various brands) Various Remove the universal antenna from your car. Take off the interior light or the trim panel at the rear of the car (depending on whether the antenna is…
(Various brands) Various Performing this task will not be complicated at all, as you will not need any special tools. Just follow this simple and quick guide. First, locate t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos