Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to inflate the tires and set the TPMS on a car.

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Wheel
Operation: How to inflate the tires and set the TPMS on a car.

Adjusting the correct tire pressure is a fundamental operation for safety. To check the pressures it is first necessary to check the correct pressures chosen by the manufacturer and which are present in the user and maintenance manual or on the plate located on the side of the front door pillar on the driver's side. Then equip yourself with a compressor for inflation, unscrew the tire valve cap and connect the compressor tube to it through the pressure gauge to check the pressure and inflate or deflate the tire to reach the required level. Once the pressures of all four tires have been checked, it will be possible to access the driving position and reset the tire pressure warning light with the standard procedure provided for the car model.


Posted on 8 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Vari - Why is the spare wheel locked? Read Answer
    • Vari - How much does it cost to align the wheels? Read Answer
    • Vari - How do you remove the spare tire? Read Answer
    • Vari - How do you replace the hub pin of the car? Read Answer
    • Vari - Where are the TPMS located? Read Answer
    • Vari - Why doesn't the car wheel come off? Read Answer
    • Vari - What does 4 wheel drive mean? Read Answer
    • Vari - What does the acronym 4wd mean in Spanish cars? Read Answer
    • Vari - What should be the tightening value of the rear wheel hub nut? Read Answer
    • Vari - How do i remove the wheels of the Peugeot Speedfight 2? Read Answer
    • Vari - Why can't I remove the wheel? Read Answer
    • Vari - What is the tightening torque of the wheel bolts on a Chevrolet Kalos? Read Answer
    • Vari - Where is the spare wheel located? Read Answer
    • Vari - Wheel tightening torques on Volkswagen cars? Read Answer
    • Vari - Where can the tightening torques of the wheels be found? Read Answer
    • Vari - Where is the jack positioned to change the wheel? Read Answer
    • Vari - Where is the spare wheel located? Read Answer
    • Vari - Where is the wheel repair kit located? Read Answer

How to reset the on-board computer of the Peugeot 208?

Resetting the Peugeot 208's on-board computer, the system called SMEG, is very simple. We can do this in case the system shows signs of malfunction, freezes, or in any other case where a restart could solve the problem. To reboot, simply hold down the two keys located in the lower left corner of the computer at the same time. After a few seconds, the SMEG system display will switch off, the Peugeot logo will appear and the start-up procedure will start. We wait patiently for the restart to complete as it may take some time.

Watch the video!


by ScegliAuto

More videos