Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
To be able to replace the rear brake pads on an Audi car that is equipped with the electric brake that blocks the rear caliper. Therefore, to proceed with the replacement it will be necessary to unlock the brake with the OBD eleven diagnostic system. First of all, with the diagnostics, we will deactivate the electric brake and start the pad change mode. We disassemble the rim and lift the car, then unscrew the fixing bolts of the brake caliper and remove the pads. We take the new pads and mount them, after which we tighten everything again and proceed in the same way on the other rear wheel. Finally with the diagnostics we reset the electric parking brake.
Posted on 8 May 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |