Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Valve Cover

Model: (Various brands) Various - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Engine

This video is currently unavailable

This tutorial shows how to install a new valve cover and replace the gaskets on a Rover MG. After obtaining the gasket and cover kit, carefully open its packaging. Position the cover so that the bolt holes align; then place the cover that secures the top of the cylinder head.

At this point, position and tighten the bolts for the fastening. Using a 10 mm ratchet, further secure the bolts.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

(Various brands) Various On a car with a turbocharger, the wastegate valve is essential to prevent damaging the turbo itself. This video explains it in a very simple and unde…
(Various brands) Various To adjust the valves in a four-stroke engine, you need to remove the cylinder head cover to access the pushrods and rockers. Locate cylinder 1 and co…
(Various brands) Various Today, you will see the main steps to disassemble and replace the valve seals of a cylinder head. This operation is not very simple and requires a lo…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos