Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Cobra Alarm System?

Model: (Various brands) Various
Part: Key

Video tutorial

To disable the Cobra alarm system, press and hold both buttons located at the top of the remote control. While holding them, the light in the centre of the device will start to flash: when the light becomes steady, release the buttons and then press the left button, causing the indicator to flash again.

When it becomes steady once more, you can release the button, allowing the car's alarm system to be properly disabled.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Install an Alarm System in Your Car?
How to Install an Alarm System in Your Car?
(Various brands) Various To install an alarm system in your car, connect the positive and negative power cables of the alarm siren to the car battery or another 12-volt power…
How to Disable the Alarm System on a Car
How to Disable the Alarm System on a Car
(Various brands) Various All alarm systems in cars can always be turned off: if a passenger or a dog is left in a locked car or if the car is deliberately transported on a va…
How to Remove the Block Shaft on a Car
How to Remove the Block Shaft on a Car
(Various brands) Various Have you purchased this mechanical anti-theft system and don't know how to use it? The video and description provided below contain instructions and …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos