Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Service Light on the SH 300?

Model: (Various brands) Various
Part: Service warning light

To reset the service oil change light on the scooter, follow these steps: after performing the service and changing the oil, you need to clear the indication on the dashboard. To do this, turn on the ignition (the "change oil" light will be on) and simultaneously press and hold the two buttons located on either side of the speedometer. After a few seconds, the oil change light will turn off. You can then switch off and restart the ignition to verify that the warning has indeed turned off.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on an Aprilia Scarabeo 300
How to Reset the Service on an Aprilia Scarabeo 300
(Various brands) Various To reset the service on the Scarabeo 300, start by turning on the instrument panel, noting that the service light (spanner) is on, then proceed with …
Resetting the Service Light on the Proton X50
Resetting the Service Light on the Proton X50
(Various brands) Various The instructions in this guide will allow you to reset the service light on the Proton X50. First, get into the vehicle and connect your diagnostic t…
How to reset the service light on Citroën and Peugeot vehicles
How to reset the service light on Citroën and Peugeot vehicles
(Various brands) Various The service light reset on Citroen and Peugeot vehicles is done by following the same steps. To reset the service light, we must: - keep the instrume…

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos