Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
If you have problems with idle adjustment, this video is for you: often the problem is insufficient discharge to the ground, because the cable is damaged or oxidized and therefore the control unit no longer discharges properly. The best thing is to connect them either to the negative pole of the battery or to the bodywork of the car. Take a common electric cable and take the measurements between a screw of the control unit and the point you prefer. The youtuber connected it to the negative pole of the battery. Remove one screw from the control unit, curl the wires and connect them to the screw, or put a lug on it; then connect it to the negative pole of the battery, as the youtuber did. You will certainly benefit from this operation. We will do the same for the other ECU as well. A mass problem can give a whole series of minimum problems which is not good.
Posted on 2 April 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.082
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |