Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the headlight bulb on your Kymco

Model: (Various brands) Various
Part: Headlight bulb

If we need to replace the front light bulb on our scooter, we can proceed by following the instructions given here and with the help of the video, first of all it is necessary to unscrew the rear view mirror, then with the help of a screwdriver it is necessary to unscrew the two screws placed immediately behind the fairing to be able to disassemble it, in the front part of the fairing above the headlight there is another screw that we must disassemble to remove a fringe and under it there are two other screws that we must unscrew. Under the handlebar on both sides there are other screws that we should remove and at that point with a plastic lever we need to separate the two panels that make up the body and in this way we will have access to the rear part of the headlight to then be able to replace the bulb by first detaching the power connector.


Posted on 29 August 2024 by ScegliAuto



How to replace the headlight bulb in a Kawasaki ER-6N
(Various brands) Various In this video tutorial we can see how it is possible to replace the halogen headlight bulb in a Kawasaki ER-6N: the bulb is positioned in the center
How to change the bulb of the Piaggio
(Various brands) Various Replacing the headlight bulb of a Piaggio SI can be easily done independently. The materials needed for this operation are: a torpedo-shaped bulb wit
How to replace the headlight bulb of a vehicle
(Various brands) Various It doesn't matter if your car is a Citroen, a Peugeot, a Jeep, or an Opel, replacing the headlight bulb of any car usually follows almost the same st

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos