Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : Adjustment and alignment of headlights.

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Headlight
Operation: Adjustment and alignment of headlights.

In this video we see how important it is to have properly aligned headlights and how it is possible to adjust them on all cars. In fact, all vehicles have the ability to adjust the headlights both in depth and direction. When driving on the left side of the road, we need to illuminate the center of the road in a certain way, avoiding dazzling oncoming traffic, but illuminating the right side of the road more so as to see road signs and any pedestrians or cyclists. This is achieved by adjusting the screws on the headlights and projecting the beam of light onto a clear and flat surface, in order to see how the cone is projected. As a result, we can adjust the screws on the headlights, which should be checked periodically, because poorly maintained roads can ruin the alignment.


Posted on 10 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - How do you replace the front headlight of the Kymco Downtown 300? Read Answer
    • Vari - How do you adjust the front light on the Vespa Gts? Read Answer
    • Vari - What is the correct position of a led light? Read Answer
    • Vari - How to replace the headlight bulbs on the Kymco Agility R16 +? Read Answer
    • Vari - How to change the front bulbs of the Piaggio Beverly 250? Read Answer
    • Vari - How to open the car headlight? Read Answer
    • Vari - When does code 21 appear in Opel? Read Answer
    • Vari - What does code 18 mean in the Vauxhall Adam? Read Answer
    • Vari - What to do if the headlight bulb holder retainer no longer holds? Read Answer
    • Vari - What does the "AFS" light on my car mean? Read Answer
    • Vari - How do you disassemble the headlight of a Suzuky Gsr 600? Read Answer
    • Vari - Position light replacement: how much does it cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos