Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Renew the Interior Trim of a Car on a Budget

Model: (Various brands) Various
Part: Body

In this video, you will see how to renew the interior of a car - in this case, it was damaged due to owner distraction - who thought to wrap it with carbon fibre imitation film. This film can easily be found on all e-commerce sites, both adhesive and non-adhesive, and at a very low price. First, unscrew the trim pieces you want to cover with the film for easier handling; cut the film to fit each piece; mark the holes, carefully follow them with a craft knife, and then apply it to the clean and degreased piece. For perfect adhesion, heat it with a hairdryer. Reassemble everything; it requires a bit of patience and skill, but the result is very good.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Renew Your Car's Steering Wheel on a Budget
How to Renew Your Car's Steering Wheel on a Budget
(Various brands) Various In this video, learn how to restore the damaged steering wheel of your car at minimal cost: you can find the kit to cover your steering wheel, follow…
How to Restore Yellowed Headlights on a Budget
How to Restore Yellowed Headlights on a Budget
(Various brands) Various This tutorial shows you how to easily restore yellowed headlights on a budget. You will need a product from Arexons called Rinnova Fanali, which cost…
How to Renew Scratched Alloy Wheels on a Budget
How to Renew Scratched Alloy Wheels on a Budget
(Various brands) Various To restore our wheels, you will need sandpaper in various grits: 400-600-800-1000-2000-5000. You will also need masking tape, fine-grit polishing com…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos