Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
As seen in the video, to add your smartphone display to your Cadillac Cue, you will need to dismantle all the panels that support it on both the right and left sides. On the passenger side, you will also need to remove the panels below the storage compartment and the storage compartment itself. You must also remove the lower piece of the console. After unscrewing the two 7 screws, you will be able to lift the middle door and remove the central panel. Unscrew the other supporting screws. At this point, you should have purchased a cigarette lighter with a USB port in advance and from the rear midline, you should prepare a housing for your USB port, extend the USB port connector wire to the connectors behind the console. Once connected and your smartphone is plugged into the USB port, you will find it on the display of your Cadillac CUE.
Posted on 4 June 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |