Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Perform various measurements using a multimeter.

Model: (Various brands) Various
Part: Checks and maintenance

In this video we see the different tests that can be performed on a relay with a multimeter: we use the voltmeter function, set it to 20 volts and place it on the relay where we want to perform our check. Here there are two contact blades, we insert the red and black connectors (positive and negative) and check that the contact is correct. We now move on to the mode that allows us to check the intensity of consumption, setting it to 10 amps, changing the terminal, and connecting the power connector of the pump to perform the check and thus see the consumption in milliamps. We now move on to checking the resistance of the coil, setting it to 200 joules and measuring between the two circuit blades to see the result and we see that it measures 154, so this means that there is continuity in the coil.

Posted on 15 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Car parking sensors assembly
Car parking sensors assembly
(Various brands) Various In the video we will see some tips on how to mount the parking sensors in any car. First we go to find the new parking sensors for our car: after tha…
How to Test Car Fuses with a Multimeter?
How to Test Car Fuses with a Multimeter?
(Various brands) Various You can test the functionality of the fuses installed in any car using a multimeter by opening the corresponding fuse box to access the fuses inside.…
How do you test car fuses with a multimeter?
How do you test car fuses with a multimeter?
(Various brands) Various In order to test the fuses installed on any car using a multimeter, it will be necessary to open the corresponding fuse box to access the fuses to be…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What does Hill holder unavailable" mean? Read answer
    • Vari - What does "Hill Holder Unavailable" mean? Read answer
    • Vari - Why is the Kymco Downtown 300i not starting? Read answer
    • Vari - How many km do you need to service the T-Max 530? Read answer

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos