Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an LDV G10

Model: (Various brands) Various
Part: Service warning light

In this guide, we will describe all the steps necessary to manually reset the service light on your LDV G10. First, take your seat in the driver's position and start the ignition in diagnostic mode by pressing the start button twice consecutively. Immediately after, press and hold the button located at the end of the left steering lever for a few seconds. Once the new screen appears on the display, rotate the previously used button upwards and press it five times consecutively to complete the reset of the light.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the LDV G10
How to reset the service on the LDV G10
(Various brands) Various In this video, it is shown how to reset the maintenance light on the LDV G10. To reset it, first start the instrument panel by turning the key twice,…
How to reset the service light on a 2024 LDV Delivery 9 vehicle.
How to reset the service light on a 2024 LDV Delivery 9 vehicle.
(Various brands) Various Today we will explain how to reset the maintenance reminder on a 2024 LDV Delivery 9 vehicle. Before performing the service light reset, we remind yo…
Where is the OBD port located on the 2023 LDV SUV?
Where is the OBD port located on the 2023 LDV SUV?
(Various brands) Various The OBD port on a 2023 LDV/D90 SUV vehicle is located inside the vehicle's cabin, specifically under the steering wheel, just above the brake and acc…

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos