Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to replace the bulbs in the central console of the Honda Element?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Dashboard light
Operation: How to replace the bulbs in the central console of the Honda Element?

In this tutorial, we can see how to replace the bulbs of the central console in the Honda Element, a very simple and quick operation. First of all, make sure that the key is not inserted, then, preferably using a plastic spatula, lever along the perimeter of the console in order to disengage it from the dashboard. Once this is done, disconnect the two rear connectors and proceed with the replacement of the faulty bulb. To remove the bulb, we will need to rotate it slightly counterclockwise using a small flat-tipped screwdriver.


Posted on 11 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - Why doesn't the ceiling light work if I open the door? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos