Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a 2DIN Car Radio

Model: (Various brands) Various
Part: Car stereo

Video tutorial

In this guide, learn how to install a 2DIN car radio: first, remove the radio from your vehicle, then obtain the radio. The one recommended by our YouTuber can be found on Amazon with the code B08T8Z2MVP at a cost of £279.99, delivery included.

Position the two metal plates, then choose between the two connectors provided according to your power on/off method. Before installing everything, perform a functionality test.

If all is well, proceed with inserting the unit, securing it with screws, and routing the cable along the windscreen. Turn on the unit and connect your phone normally.

You can also display your car's logo on startup; just select it. There are various facias and adapters available for all cars. It has mirroring functionality with your phone.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

How to Set the Car Logo on a Chinese 2DIN Car Radio
How to Set the Car Logo on a Chinese 2DIN Car Radio
(Various brands) Various In this video, you will learn how to display your car's logo on a Chinese 2DIN car radio. First, go to "settings", then look for "car" and select "fa…
How to set up the logo of your car on an Erisin 2DIN car stereo
How to set up the logo of your car on an Erisin 2DIN car stereo
(Various brands) Various This video is not dedicated to a car model, but to a 2Din radio model made in China, which can therefore be installed on any car. If we want to custo…
Solution if the Android radio drains the battery
Solution if the Android radio drains the battery
(Various brands) Various Let's see how to remedy the fact that our new Android 2DIN radio, installed on our slightly old car, tends to drain the battery after two or three da…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos