Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Is it possible to use water instead of coolant?

Model: (Various brands) Various
Part: Checks and maintenance

In this video, you will see if it is possible, in case of emergency, to add water to the coolant reservoir without causing problems to the vehicle. Cooling the vehicle is always relative, as "cold" means 90°C. If you are out of coolant (and find fluid on the ground), you can add plain water in an emergency. When the engine is hot, open the cap of the reservoir very carefully, and in this case, let the engine idle and add more water. If it leaks directly while pouring, turn everything off and do not drive; it is not worth the risk, you could cause damage. If the red warning light comes on while driving, stop and check the reservoir. Add water if necessary and monitor what happens. If the reservoir is full, then you need to switch off and see what occurs. If it comes back on immediately, avoid queues (if possible) and turn the heating to maximum inside.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Bleed the Engine Coolant
How to Bleed the Engine Coolant
(Various brands) Various If the engine head has blown, to bleed the engine coolant and arrive at the first mechanic with minimal damage, you can follow this procedure. But fi…
How to Replace or Top Up the Coolant on a KTM Motorcycle
How to Replace or Top Up the Coolant on a KTM Motorcycle
(Various brands) Various The first warning, which may seem trivial - but it isn’t - is to check the coolant with the engine cold. Check if there is coolant, which is specific…
How to replace the coolant in a scooter.
How to replace the coolant in a scooter.
(Various brands) Various In this video tutorial, you can see how to replace the coolant in a scooter. First, open the cap of the coolant reservoir; now loosen the hose clamp …

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos