Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on FCA Group Vehicles

Model: (Various brands) Various
Part: Service warning light

Resetting the oil warning light on our FCA group vehicles has never been so simple thanks to this handy video tutorial that will explain in brief steps how to perform this procedure independently without wasting time and money. Start by turning on the vehicle's instrument panel and continue the procedure by fully pressing the accelerator pedal. Then, press the brake pedal seven times while keeping the accelerator pedal pressed. On the seventh press, hold the accelerator pedal for another 60 seconds, then release both pedals. Turn off the vehicle and wait another 60 seconds. After the indicated seconds, turn on the vehicle, wait for the warning lights to stop flashing, and you have completed the reset.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Update the Uconnect System
How to Update the Uconnect System
(Various brands) Various In today's video, we will see how to perform the latest update of the Uconnect system in FCA group vehicles. Turn on the ignition to activate the inf…
How to Calibrate the FCA Dual Clutch Automatic Gearbox
How to Calibrate the FCA Dual Clutch Automatic Gearbox
(Various brands) Various In this video, you will learn how to calibrate the FCA DCT automatic gearbox. This operation should be performed in areas with little traffic. The re…
How to Reset the Oil Light on the Sym Symphony 125
How to Reset the Oil Light on the Sym Symphony 125
(Various brands) Various After replacing the engine oil on this scooter, you need to reset the warning light that has illuminated on the instrument panel, indicating an oil c…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos