Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on an Aixam

Model: (Various brands) Various
Part: Service warning light

Resetting the oil light on Aixam vehicles follows a very simple procedure that you can carry out independently. The first step is to press and hold the button on the instrument panel for a few seconds while simultaneously turning on the ignition. The second step is to wait for the reset to complete and for the light to disappear before releasing the aforementioned button. Once the light has turned off, you can release the button. After completing these two steps, turn off and then restart the vehicle to confirm the reset of the light.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Aixam Coupe S Z402?
How do you reset the Service light on the Aixam Coupe S Z402?
(Various brands) Various In order to reset the Service light of the Aixam Coupe S Z402, you need to replace the engine oil and corresponding filter, following the steps shown…
Service Reset on an Aixam
Service Reset on an Aixam
(Various brands) Various Thanks to this brief tutorial, you can see how to reset the service light on the new models from the French manufacturer Aixam. This is a very simple…
Resetting the Service Light on Aixam Microcars
Resetting the Service Light on Aixam Microcars
(Various brands) Various Hello everyone! Today, you will learn how to reset the service light on Aixam microcars. This light illuminates at predetermined intervals (set by th…

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos