Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to activate Bluetooth Fiat

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Accessory Kit
Operation: How to activate Bluetooth Fiat

Almost all the models of the Turin-based company are equipped with the accessory called blu & me which allows you to interface the car's entertainment devices with your smart phone or with a mass memory to be inserted into the USB port: it often happens that this device goes broken down and the first symptom is that the kilometers flash on the instrument panel; configuring your smart phone via bluetooth is extremely simple just call up the voice commands with the appropriate button on the steering wheel spokes, access the settings and then activate the phone's bluetooth to recognize and activate the car's one through the pin code .


Posted on 16 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - How do you remove the car headrests? Read Answer
    • Vari - How much does the USB cigarette lighter socket cost? Read Answer
    • Vari - What to do if the clutch becomes stiff and the gears don't engage? Read Answer
    • Vari - What is the price for a usb socket for the car cigarette lighter? Read Answer
    • Vari - What is the car grade indicator? Read Answer
    • Vari - How much does it cost to coat a car with film? Read Answer
    • Vari - How much does it cost to replace the headliner? Read Answer
    • Vari - How much does the block shaft cost? Read Answer
    • Vari - Where to place the telepass? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos