Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Child Seat in a Car

Model: (Various brands) Various

This video shows how to avoid mistakes that can make installing a child seat in your car potentially dangerous: first, read the instructions that come with the seat. "0+" type seats (for weights under 6 kg) must be installed facing the rear of the vehicle. Seats from subsequent groups should be oriented in the direction of travel, and the best position is in the centre of the rear seat, especially if the seats have Isofix attachments and the seatbelts have three-point attachments. Remember that if you want to install the seat in the front passenger seat, it must always be installed facing the rear, and in this case, the passenger airbag must be deactivated. If your car does not allow this, then place the seat in the rear or risk causing very serious harm to the child in the event of an accident. If the seat has been involved in an accident, it must be replaced.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install a Child Seat with Isofix Attachments in a Car
How to Install a Child Seat with Isofix Attachments in a Car
(Various brands) Various If you need to install a child seat in your vehicle with Isofix attachments, you will find important instructions in the description below and in the…
How to install a child car seat without Isofix attachment
How to install a child car seat without Isofix attachment
(Various brands) Various How can you install a branded child seat if your car does not have Isofix attachments? We see it in this video. The rear seat should not be a single …
Risks and Mistakes When Installing a Baby Seat in a Car
Risks and Mistakes When Installing a Baby Seat in a Car
(Various brands) Various When installing a baby seat in a car, always position it facing the rear. Secure the seatbelt in the buckle, ensuring the lap belt is at the front an…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos