How to Inflate Car Tyres?

Model: (Various brands) Various
Part: Wheel

Adjusting tyre pressure is a task that can be done independently at any petrol station. The important thing is to carefully follow the instructions in the owner's manual, which lists the values to set for correct tyre pressure. To adjust the tyre pressure, park the car on level ground and turn off the engine. Then, unscrew the valve cap and insert the air gun with the pressure gauge. Adjust the pressure, and when it's correct, remove the air gun and replace the valve cap. Repeat the same procedure for the other tyres.

Updated on 18 September 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Valve - Maintenance and repair on other vehicles

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

How to Inflate Car Tyres?

Related tutorials

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

More videos