Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
The leather seats of our car after several years of intense use may show signs of wear, especially in the areas that are most frequently rubbed, such as the lumbar supports that are stressed when getting in and out of the car. Before proceeding with an expensive replacement of the upholstery, let's try to fix it with a specific repair kit that can be purchased online: B08LG99CC5. Clean the affected surfaces with a detergent, use a small brush to apply the product to the worn areas, dab with a sponge to even out the product. Let the product dry for at least forty-eight hours.
Posted on 4 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |