Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Headrest

Model: (Various brands) Various
Part: Accessory kit

To complete this task, simply follow this brief guide to understand how to carry out the replacement entirely by yourself. To remove the headrest, you will need a standard flathead screwdriver or any other tool with a thin tip to lift the two rings around the circular rods that enter the seat you are interested in replacing. This will give you access to the buttons that allow for the complete removal of the headrest. Now, you can install the new part.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Do you want to remove the headrest from your car? This operation is very simple; here's how to do it. First, open the door and enter the back of the …
(Various brands) Various This video and the description below provide instructions on how to properly adjust the headrest. First, adjust the height so that the top is at leas…
(Various brands) Various Adjusting the headrest in a car is very important for safety as it can often prevent whiplash in the event of an accident or collision. The driver's …

    Frequently Asked Questions

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos