Do it yourself
Frequently asked questions about cars and motorcycles

Location of the fuse box in Scania trucks

Model: (Various brands) Scania
Part: Fuse box

Video tutorial

To find the fuse plate housing in Scania trucks, open the passenger door, and in the side section of the dashboard, remove the central panel by prying it off with your fingers. Rotate the plastic screw at the top edge by ninety degrees and remove the lower panel of the dashboard in front of the passenger.

This will give you access to the fuse plate of the truck; to find a specific fuse, the wiring diagram on the back of the panel you just removed or the one in the user manual will be helpful.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

(Various brands) Scania In this video we can see where the fuse boxes of the Scania Next Gen trucks are located. The box is inside the cabin, on the passenger side. We must …
(Various brands) Scania The fuses on the Scania 124L are located inside the only fuse box present on the vehicle: in this type of vehicle, this box can be found inside the c…
(Various brands) Scania The fuses of the Scania G450 are located inside the special fuse box that is installed on the vehicle: in this type of vehicle, it will be possible t…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos