Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Properly Install an H7 Halogen Bulb

Model: (Various brands) Various
Part: Light bulb

This video is currently unavailable

If you need to change a bulb in your vehicle, are you sure you know how to correctly install the H7 halogen bulb? This video shows you how: these bulbs have a tab that indicates the correct position for installation, and the tab must fit into the designated slot, indicated by two pins that are shaped to guide you. The position may vary depending on the type of vehicle, and for this reason, the two pins may have slightly different shapes, but the bulb's position must always remain the same.

Incorrect installation can be dangerous for both the driver and those in front of the vehicle with improperly fitted lights, so pay close attention during installation.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Install H7 Bulbs
How to Install H7 Bulbs
(Various brands) Various In this video, see how to install H7 bulbs correctly: first, to remove the bulb, unlock the spring and pull out the H7 halogen bulb. To insert the LE…
How to Properly Install an H7 LED Bulb
(Various brands) Various In this short video, we can see the correct way to install an H7 LED bulb: first, remove the halogen bulb from its housing by turning it counterclock…
How to Install an H4 LED Bulb
How to Install an H4 LED Bulb
(Various brands) Various How do you correctly install an H4 LED bulb? First, remove the two springs that hold the halogen bulb holder in place, then take out the halogen bulb…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos