Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Maggiolino - Engine oil

Engine Oil Volkswagen Maggiolino (1938-1980 / mk 1)

Volkswagen Maggiolino (1938-1980 / MK 1)
When to Change Transmission Oil on VW Beetle
How to replace the transmission oil on the old model Beetle? Lift the car with a jack to access underneath the vehicle. To change the transmission oil, you …Read all…
Posted on 3 May 2026 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
Removing Engine Oil on a VW Beetle
Do you want to replace the oil on a Volkswagen Beetle? Follow these steps: lift the bonnet and secure it, then remove the filler cap. Raise the car on a column …Read all…
Posted on 5 April 2026 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
Engine Oil and Oil Filter Replacement
The drain plug is located at the centre of the oil sump: position a suitable container and unscrew the nuts around the perimeter of the plug to allow the used …Read all…
Posted on 11 February 2026 by ScegliAuto
Alternator (2) Transmission (1) Spark plugs (4) Carburetor (1) Body (4) Key (2) V-belt (1) Onboard computer (1) Checks and maintenance (7) Shifter boot (1) Bearing (2) Headlight (3) Fuel filter (1) Parking brake (1) Clutch (1) Window switch (1) Accessory kit (2) Headlight bulb (1) Engine (7) Engine oil (3) Clock (1) Door trim panel (1) Windshield (2) Front bumper (2) Rear bumper (1) Fuel pump (1) Car door (1) Radiator (1) Seat (1) Axle shaft (3) Suspension system (1) Valve (2) Side window (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos