Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Maggiolino - Axle shaft

Axle Shaft Volkswagen Maggiolino (1938-1980 / mk 1)

Volkswagen Maggiolino (1938-1980 / MK 1)
Replacement of Rear Wheel Shaft
Obtain the replacement part. Lift the vehicle, secure it, and remove the wheel. Remove the metal cover protecting the retaining bolt on the hub, which will …Read all…
Posted on 11 February 2026 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
Replacement of Torsion Bar Bushes
Once the bodywork is removed, working on the Beetle's chassis is very simple; the difficulties encountered are mainly related to the presence of any rust that …Read all…
Posted on 9 February 2026 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
Replacing the Rear Wheel Half Shaft
Necessary tools: puller, 18 mm and 19 mm socket spanners, a 5 mm Allen key, screwdriver set, large hammer. Obtain the replacement half shaft. Lift the vehicle …Read all…
Posted on 9 February 2026 by ScegliAuto
Alternator (2) Transmission (1) Spark plugs (4) Carburetor (1) Body (4) Key (2) V-belt (1) Onboard computer (1) Checks and maintenance (7) Shifter boot (1) Bearing (2) Headlight (3) Fuel filter (1) Parking brake (1) Clutch (1) Window switch (1) Accessory kit (2) Headlight bulb (1) Engine (7) Engine oil (3) Clock (1) Door trim panel (1) Windshield (2) Front bumper (2) Rear bumper (1) Fuel pump (1) Car door (1) Radiator (1) Seat (1) Axle shaft (3) Suspension system (1) Valve (2) Side window (2) Steering wheel (3)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos