Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Maggiolino - Body

Body Volkswagen Maggiolino (1938-1980 / mk 1)

Volkswagen Maggiolino (1938-1980 / MK 1)
How to Restore Rusty Bumpers on a Volkswagen Beetle
On this Beetle, the original bumpers have already been replaced with aftermarket ones, which tend to rust more quickly: rust forms bubbles and unsightly spots. …Read all…
Posted on 1 July 2026 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
Replacing Floor Parts or Undercarriage
Move the front seats forward to maximise space in the rear; detach the rear seat base and remove it from the cabin; remove all coverings until you access the …Read all…
Posted on 9 February 2026 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
Replacing the Door Sill Trim
To facilitate the removal of the metal parts to be replaced, first remove the doors: remove the circlip from the hinge pin, then extract the pin and remove the …Read all…
Posted on 9 February 2026 by ScegliAuto
Volkswagen Maggiolino (1938-1980 / MK 1)
Fitting Frame Edge Seal
Before securing the seal along the perimeter of the frame, you need to shape the four strips that will be applied to the 4 sides. It is recommended to prepare …Read all…
Posted on 5 February 2026 by ScegliAuto
Alternator (2) Transmission (1) Spark plugs (4) Carburetor (1) Body (4) Key (2) V-belt (1) Onboard computer (1) Checks and maintenance (7) Shifter boot (1) Bearing (2) Headlight (3) Fuel filter (1) Parking brake (1) Clutch (1) Window switch (1) Accessory kit (2) Headlight bulb (1) Engine (7) Engine oil (3) Clock (1) Door trim panel (1) Windshield (2) Front bumper (2) Rear bumper (1) Fuel pump (1) Car door (1) Radiator (1) Seat (1) Axle shaft (3) Suspension system (1) Valve (2) Side window (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos